Brake Pedal Pressure Sensor

The G.S.E Pedal Pressure Sensor accentuates itself with great accuracy, low weight and is easily attatched to the break pedal.

The Sensor has since 1978 been delivered to some of the leading break tester manufacturer, and the Danish government motor vehicle testing authority. The Pedal Pressure Sensor is used in equipment approved by the Dutch NMI.

The measuring principle is Strain gauge full-bridge.

 

Click for larger view 

 

The Brake Pedal Pressure Sensor can be delivered in the following variations:

* Without built-in amplifier
* With built-in amplifier

Output signal and Cable:
Pedal Pressure Sensor with built-in amplifier can be delivered with output signal as requested. Cable on request such as; Spiral cable without screen Spiral cable with screen, Non-spiral cable with screen, lenght on request and the desired plug fitted.

 

Pedal Pressure Sensor without amplifier

Technical specifications no. 13210

Measuring range:
Linearity:
Output signal:
Temp. coefficient:
Supply voltage:
Current consumption.
Cable:
Dimensions:
Adjustments:		 0-100 dN + Overload 50 dN (Kgp)
0,7% 0-100 dN
1,3mV/F.S. ± 10%
0,2% pr. 10C°
max. 7,5V DC
max. 20mA
on request
L:65 W:52 H:32
0-Setting by means of the screw on the side of the sensor.
Linearity setting by means of hte screw on the side of the sensor.

Pedal Pressure Sensor with amplifier

Technical specifications no. 13220

Measuring range:
Linearity:
Output signal:
Temp. coefficient:
Supply voltage:
Current consumption.
Cable:
Dimensions:
Adjustments:		 0-100 dN + Overload 50 dN (Kgp)
0,7% 0-100 dN
0-1V at 100 dN, max. 3V
0,2% pr. 10C°
7-15V DC
max. 25mA
on request
L:65 W:52 H:34
0-Setting by means of the screw on the side of the sensor.
Linearity setting by means of the screw on the side of the sensor.

G.S.E also manufactures load cells from 200N to 10.000N (or Kgp) to customer specification.